How to Install a Handheld Bidet Spray in 5 Simple Steps

A bidet spray, also known as health faucet, is a triggered water nozzle that is installed next to the water closet. It is similar to a kitchen sink spray and can be used to clean the toilet floor and wall. The cost of supply and installation of a bidet spray in Singapore is not cheap, as it costs around $120 to $150 per toilet. Since the installation process is fairly easy (as it only involves installing an additional T-valve to the water valve), you can easily install one yourself within half an hour without the help of a plumber! In this way, you can save around $100, since the cost of the T-valve and the bidet spray is around $50!
Design: Three-D Conceptwerke

Tools needed

01. Spanner or Wrench02. T-Valve03. Bidet Spray04. PTFE Seal Tape or Plumber’s Tape05. Scissors

Step 1: Turn Off the Water Supply

Make sure that the water supply valve, located at the wall next to your water closet, is turned off before you start the installation.
Step 2: Disconnect the Water Supply Hose from the Fill Valve

Locate the fill valve underneath the water closet. Unscrew the water supply hose with the spanner from the fill valve.
Step 3: Connect the T-Valve to the Fill Valve

Note that the flat rubber washer should be inside the top of the T-valve. Wrap the PTFE seal tape around the T-valve threads, located at the bottom of the T-valve. The PTFE seal tape will help to lubricate the connection and allowing the T-valve to be screwed tighter with the water supply hose later. Screw the top of the T-valve onto the fill valve with the spanner.

Tip: To prevent leaks and for a tighter, water tight connection, wrap a few rounds of the PTFE seal tape around the threads for all the connections. Read how to use the PTFE seal tape properly here.

Step 4: Connect the Water Supply Hose to the T-Valve
Screw the water supply hose to the bottom of the T-valve, which has been wrapped with the PTFE seal tape.
Step 5: Connect the bidet spray to the T-valve

Connect one end of the bidet hose to the side of the T-valve. Remember to turn on the water supply prior use!
Design: ebstudio
Finally, check for water leaks by turning on the bidet spray!
” class=”lazy lazy-hidden” data-lazy-type=”iframe” alt=””/>[embedded content]

Tip: To avoid drilling, use drywall screws, anchors or even the heavy duty, double sided tape to attach the holster holder to the wall.

Design: The Scientist

Complete this form and we will recommend you a list of reputable interior design firms that fit your renovation requirements. It’s free!How many interior designers do you wish to get in touch with?*My PropertyMy Property Type is*The room type is*Property Status*Key Collection Time*Property Address*Upload your Floor PlanWe recommend to attach your floor plan for a better estimate. File must less than 2MB.Project InfoArea(s) you need to renovate*Preferred design style*My project priority is*My renovation budget is*Do you require renovation loan?*Other information?My Contact DetailsMy name is*My Email is*You can call me at*How Did You Get To Know Us?* Agreement*Agreement*PhoneThis field is for validation purposes and should be left unchanged.